Lift Kit
Truck Shop Services

Should You Buy a Lift Kit?

If you’re an off-roader or your work takes you to muddy job sites, Lift Kit may be worth the extra investment. Raising a vehicle creates greater ground clearance, and bigger tires can help you navigate tricky terrain.Lift Kit

Before making the decision to install a lift kit, talk to your auto mechanic and do plenty of research. Some lift kits can void your warranty, and not all are created equal.

A body kit is an aftermarket upgrade that can dramatically change the look of your vehicle. It can be made of fiberglass, polyurethane, or even carbon fiber if the budget allows. The most common type of body kit is fiberglass, which is cheap and easy to mold into a desired shape. However, it is prone to cracking upon impact. Polyurethane is more durable and can resist damage better than fiberglass. Ultimately, the choice of material should be based on both budget and performance requirements.

A good-quality body kit is designed to improve your car’s aerodynamics and appearance. It can reduce drag and add downforce, which can help keep your car stable around corners and at high speeds. It can also give your vehicle a unique and striking appearance that will catch the attention of other drivers.

Body kits are commonly called “ground effects,” “body kits,” or “spoiler kits.” They can include anything from a new front bumper and spoiler to a full rear kit with side skirts. Some of them may even come with hoods or fender flares. Some are available in a variety of colors to suit your personal style.

Many body kit manufacturers claim that their products can improve your car’s performance by making it more aerodynamic. This claim is a little bit misleading, but it does make sense that changing the shape of your car’s exterior would result in improved air flow and reduced drag. However, these claims are not backed up by any scientific evidence.

Some body kit components, like the front and rear fascias, can improve traction by filtering the airflow underneath your car and increasing downforce. Trunk spoilers are another way to improve the aerodynamics of your vehicle by redistributing airflow over the entire surface area. It’s important to note, however, that a body kit will only provide an improvement in the aerodynamics of your vehicle if it is properly installed. If you choose to install a body kit, be sure to get it professionally installed to ensure it stays in place and looks its best.

Suspension Kits

Lift kits allow you to elevate the height of your vehicle, giving it a more aggressive stance and better clearance for larger tires and wheels. These kits are available in a wide range of sizes, with most falling into the 3- to 9-inch range. They are designed to maintain acceptable steering, suspension, and driveline geometry while providing the added height you want for more rugged off-road use or a greater presence on the street.

A great benefit of a suspension lift is that there are no limitations on how high the kit can raise your truck, unlike body kits, which typically cap out at around three inches in maximum height. The additional height can make your truck look much more intimidating to other motorists and give you the confidence to tackle even the most difficult off-road terrain. Adding taller tires gives you more traction when you’re driving through mud or snow and provides more safety by allowing you to see obstacles before they appear in your path.

Suspension lift kits also provide you with more options to fine-tune the height of your vehicle by adjusting shocks and other components. Some of these include new front shocks with coilover technology and rear leaf springs that work with relocated mounts and shackle extensions. For the best results, you should always choose a reputable mechanic to install your lift kit. They’ll discuss your brand options and costs and provide a crash course in the dos and don’ts of adding these custom upgrades to your vehicle.

It’s important to note that any time you modify the configuration provided by your manufacturer, you should be prepared for potential negative consequences. For example, raising your vehicle with a suspension lift may reduce maximum safe operating angles and affect roadholding performance. Moreover, some manufacturers won’t warranty vehicles with modified suspensions. However, if you’re looking for more off-road utility, a better ride height, and the ability to run monster tires, a suspension lift is definitely worth the investment. Besides, it can add to the resale value of your vehicle down the road. Just make sure you go to a reputable mechanic for your lift kit installation so you don’t get the runaround from scam artists.

Lift Kits with Shocks

Lift kits are a great way to give your truck or SUV a different look and allow you to mount larger wheels and tires. They come in a variety of styles and can be tailored to suit your needs and budget. However, before you choose a lift kit, it’s important to know what kind of upgrade you want and the possible drawbacks.

The two most common lift kits are suspension and body kits. A suspension lift raises the entire suspension system, including the shocks and springs. A body lift only raises the area where the body of the vehicle meets the frame of the car.

A suspension lift can raise the height of your vehicle by as much as 10 inches. They are the best option if you’re looking for both a higher ride height and better off-road handling. Most of these kits include a new set of shocks, front control arms, extended sway bar links, new lower control arm bushings, front differential spacers, and rear axle spacers. They also have a new leaf spring pack that is fatigue-resistant and will provide the lift you’re looking for.

With a suspension lift, you can run off-road tires, which will help you get through deep snow or mud. The wider tires will also improve the overall performance of your truck. It’s worth noting that a suspension lift will add weight to your vehicle, which can reduce fuel economy.

A body lift, on the other hand, will not add much to your ground clearance. It will create a gap between the body of the vehicle and the frame, which can be an issue for some drivers. It will also not change the vehicle’s center of gravity and will only raise the ground clearance a few inches.

While lifting your vehicle can increase its aesthetics and off-road capability, it can also pose a safety risk if you’re not careful. Many states have laws regarding how high a vehicle can be raised, and failing to adhere to these regulations can lead to expensive tickets and even catastrophic injuries. You should always check with your local authorities to find out the laws in your area before deciding to install a lift kit.

Lift Kits with Struts

Many people who drive trucks, SUVs, and crossovers love the way their vehicle looks with a lift kit. A lift kit can raise the front of your vehicle so it is level with the back, eliminating the factory rake that makes the truck look nose-down and can be dangerous when hauling heavy loads. A lift kit can also allow you to use larger tires, which gives a custom look and enhances performance when off-roading. At Les Schwab, we stand behind every lift and leveling kit we install with a parts-and-labor warranty for your peace of mind.

There are several different types of lift kits available for your truck or SUV. Each type has its own benefits and drawbacks. A strut-mod lift kit, for example, allows you to lift your front-wheel-drive vehicle without changing the spring rate or requiring major trimming of your fenders. However, this kind of kit has a limited amount of lift, and you may run into problems with large tires.

A suspension lift kit is a more expensive option that will give you a higher ride height and increase your ground clearance. This is important for off-road driving because it will allow you to drive over bigger rocks, deeper ruts, and other obstacles that your stock suspension would normally scrape against. Suspension lift kits will typically include coil spring spacers and shock absorbers.

Another advantage of a suspension lift kit is that it will not affect the factory ride quality. The springs and shock absorbers are tuned for the stock ride height, so adding a lift kit will not cause it to become too stiff or uncomfortable.

If you want the best ride quality, a kit that uses coil-over shocks and adjustable struts will be your best bet. These kits will provide a smooth, comfortable ride that can handle on- and off-road conditions. They are also customizable, allowing you to choose how much lift you want and what sort of handling characteristics you prefer.

While a suspension lift kit will give you the most impressive ride quality, it is also the most costly. If you’re looking for a budget-friendly way to give your vehicle a customized look and some extra ground clearance, a strut mod or leveling kit might be a better choice.

Stump Removal
Tree Services

Stump Removal: Why You Should Leave it to the Pros

Stump Removal Austin is a great way to prevent tripping hazards in your yard and make room for future planting. Several methods are available, including mechanical grinding and chemical treatment.Stump Removal

A professional stump grinder removes the stump and grinds the roots underneath, leaving a smooth, even surface. However, the process is time-consuming and requires special equipment.

Stumps are not only unsightly, but they also create tripping hazards and can make it difficult to mow and maintain your yard. In addition, they may cause foundational problems with their long, invasive roots. Homeowners often remove them to improve their curbside appeal, which can increase the value of their homes during resale. While some people may try to DIY their stump removal, it is usually best left to professionals. They have the proper equipment to grind away the stump and its roots, which can be much cheaper than removing the entire tree.

Stump grinding costs start at $150 for an average-sized stump. The cost will rise depending on the size of the stump, the age of the stump, and the soil condition. For example, rocky soil can damage the equipment used to grind stumps. Moreover, it is harder to grind a larger stump than a smaller one because the machinery requires more power.

In addition to the cost of the stump grinding machine, homeowners will have to pay for fuel and labor. Some arborists will even charge a travel fee to cover their expenses when traveling to and from your property. However, these fees are typically lower in the winter, when demand for stump grinding is low.

Other potential costs include the purchase and use of a stump grinder, which can be quite expensive, as well as the cost of yard clean-up. It is important to ask the professional about these additional costs before hiring them for the job. It is also a good idea to get a quote in writing and to clarify any other details regarding the job, such as its turn-around time, the safety procedures they will use, and what they will do with the piles of sawdust caused by the process.

After the stump is removed, you will need to lay sod to cover the new hole in your yard. This will add to the overall cost, but it is a necessary step if you want your yard to look good after the work is done. It will also prevent the area from becoming an eyesore and a breeding ground for pests like termites, ants, and beetles.


If you’re planning to remove a tree stump from your garden, it’s important to take the necessary safety measures. This is because the process can be dangerous and requires heavy equipment, such as a stump grinder. To ensure your safety, be sure to wear the proper work attire and read the operator’s manual carefully. Before you start, check the area around the stump for tripping hazards and clear all debris from the work site. It’s also essential to inspect the stump for underground wires or pipes.

During the stump removal process, it’s crucial to wear safety gear, including gloves, safety glasses, and earplugs. These protections will protect you from injuries caused by wood chips, dirt, and the loud noises of the machine. You should also wear a face shield, as a blow to the face could seriously injure you.

While removing a stump is a good idea, it can be difficult to do on your own. If you’re not experienced with using heavy equipment, it’s best to leave the job to professionals. They can handle the grueling task more efficiently and safely than you can, and they can also grind up the roots and surface soil. Moreover, they can use specialized machines that are capable of reaching the roots at a depth below ground level.

Stumps that are too large to be removed by grinding can be yanked out with a skid steer or excavator. This method costs more than stump grinding and is a time-consuming process, but it’s a great option if the stump is blocking access to your property.

Before starting the stump grinding process, a professional will inspect the stump’s location and check the surrounding area for any hazards. They will make note of any underground utilities, such as water or gas pipes, and they will also look for fence lines or metal objects that could get in the way of the machine.

Stumps that are left behind after a tree is removed will eventually decay and invite unwanted diseases and pests into your yard. In addition, they will obstruct your view of the landscape and pose a tripping hazard. However, you can transform a rotting stump into an attractive yard feature by landscaping around it.


Stumps left in the ground are unsightly, attract pests, rot quickly, encourage weed growth, and can even damage the surrounding yard or structure of your home. Additionally, they can also cause problems when attempting to plant new trees or shrubs in the area. Luckily, there are several ways to remove stumps from your property without resorting to chemicals or expensive machinery. One of the best methods is to grind the stump down, which can be done using a machine known as a stump grinder. The other method is to simply dig out the stump and roots. This can be a labor-intensive process and requires the use of heavy equipment like a shovel, pick, or digging bar to uncover the roots and pull them out.

This is a relatively inexpensive option for stump removal, but it may take a bit of time to complete the task. First, cut the stump down as close to the ground as possible using a chainsaw. Then, cover the stump and the exposed roots with a plastic tarp. Next, pile up organic waste such as hay or tree bark over the tarp to keep it in place. The tarp will eventually trap the stump and its root system in the dark, thereby hastening the natural rot process. The stump will eventually rot away and can then be removed as needed.

Another quick and easy way to remove a stump is to burn it out. This method requires a little more work than digging, but it can be faster and more effective than using chemical solutions. To kill the stump, pour scalding water over it and expose as much of its root system as possible. Once the water has soaked through, dig out the stump and roots using a shovel or picking mattock.

Epsom salt is a popular bath-time essential, but it also moonlights as an easy-to-use stump removal solution. This natural, additive-free substance draws out the stump’s life-sustaining moisture, killing it within a month or two. You can also try potassium nitrate, a common horticultural fertilizer, to achieve the same results.


Depending on the size of the stump, the length of its roots, and the method of removal used, removing a tree stump can be a very time-consuming and labor-intensive project. For example, grinding a single stump can take as little as 15 minutes or as long as an entire day. This is because a stump grinder requires large equipment to remove the entire root system, which must then be hauled away. In addition, stump removal can be especially difficult in areas where machinery cannot easily access the site. This can increase costs and add to the overall length of the project.

If a homeowner chooses to use the manual removal method, they must use axes and other tools to break apart the stump and pull it out of the ground, roots and all. While this is the most thorough method, it can also be the most costly. This is because a stump can be very deep underground and may have a complex root system that needs to be removed. In addition, the roots can damage buried pipes or cause structural damage to buildings or other structures.

Another option is chemical rotting, which is a slower but less expensive option. It involves drilling holes into the major structure of the stump and inserting a chemical mixture that promotes fast rot. This can be done by the homeowner or a professional. This method can be a great choice for homeowners who want to avoid the expense of hiring a professional.

Stumps can be unsightly and can become a tripping or falling hazard, and they can also be a magnet for pests and fungi that spread to surrounding plants and trees. They can also interfere with future plans for landscaping, as they can block a driveway or sidewalk and prevent lawns from being leveled out.

There are several different ways to remove a stump, including hiring a professional, using chemicals, and burning the stump. A stump can also be removed by digging out the sides and top of it. This can be very labor-intensive, but it can be a cheaper alternative to hiring a professional. This method can be particularly challenging in situations where the stump is surrounded by hardscaping, like a patio or retaining wall, and must be dug out without damaging the materials.


How Commercial Movers Can Help Your Business

If you’re planning on moving your business, there are several important factors to consider. For one, hiring a professional commercial mover can help to ensure that your business doesn’t suffer any downtime during the relocation process.Movers

Moving Companies have the expertise to handle all of your office equipment, machinery, furniture, and other items. They can also provide specialized packing and transportation services, which are essential for a safe move.

Commercial movers can provide you with a variety of services, including packing, transporting, and unpacking your items. They can also offer storage solutions if needed. These services can help you save time and money, and they can ensure that everything arrives at your new location safely and securely.

The cost of hiring a commercial mover can vary depending on the service you need and the amount of work involved. Generally, professional movers charge an hourly rate for their services. These rates can range from $90 to $120, and they should include a tip for each worker.

If you’re looking to move your office from one building to another, hiring a full-service commercial mover can save you a lot of money in the long run. They can handle all of your business equipment, furniture, documents, and more.

They can also ensure that your belongings are properly packed so they don’t get damaged during transportation. They have all the tools and equipment that they need to complete the job.

Often, they can even offer special services like packing supplies and crates. This can make the entire process easier for you and your employees.

You can also hire commercial movers for long-distance moves, as they are often cheaper than local movers. This is because they don’t have to pay for fuel.

Your movers should be able to provide you with a quote for the move in advance. This will help you determine if you can afford the cost of their services.

If you have a large business, hiring professional movers is worth the investment because they will ensure that your assets are moved efficiently and safely. This can save you a lot of time and money, and it will allow your staff to focus on other important aspects of their jobs.

Some commercial movers have specialized equipment and trucks for moving and disassembling industrial plants, warehouses, and other large facilities. This can be particularly beneficial if you need to move a manufacturing plant, data center, or other large facility.

When it comes to the cost of a commercial move, you can expect to spend anywhere from $550 to $2,000; the overall cost will vary depending on the service you need and the number of movers you need.

A moving company can save you time and hassle by minimizing your business disruption. Aside from that, they can also provide the expertise you need to make your move a success.

A commercial move can be a complex task to complete. A good mover will have a systematic process to follow that will help your business relocate with ease. They will also take the necessary precautions to ensure that your sensitive equipment is secure.

Getting a good estimate of how long a commercial move will take is difficult, especially when you are dealing with multiple locations and specialty equipment. That is why a professional move estimator will be needed before you even hire a commercial moving company.

One of the most important factors in determining your commercial move time is the size of your space. The bigger the space, the longer the moving process will take. This is primarily because of the large number of pieces that will need to be moved from one location to another.

In addition, you should be aware that a professional move will require specialized tools and equipment, such as heavy-duty trucks. Choosing a moving company that is experienced with commercial moves is the key to avoiding any costly mishaps or delays.

The best way to predict how long your commercial move will take is to create a schedule that encompasses all of the major aspects of the moving process. This will allow you to plan ahead for any surprises that may arise during the course of the moving process.

It is also helpful to include specific timelines for each step of the moving process. This will allow you and your employees to stay organized throughout the whole process.

Aside from the typical moving and unpacking, a good mover will include other services such as furniture disassembly, reassembling, and cleaning to make your commercial relocation go as smoothly as possible.